The glass glue gun is convenient for our gluing, but it can cause premature damage of glue gun in the process of using.
1. The pressure of the connection should not be greater than 145psi.
2. Before removing the glue gun, the air pressure tube must be separated.
3. To operate smoothly, after each construction, the application of sealant manufacturer recommended solvents to erase the remaining sealant in the gun tube. (not allowed to soak the glue gun in the solvent)
4. During construction, the front cover of the barrel should be closed frequently.
5. After the construction, please use the glue gun, carefully damage the front cover and the back end muffler.
6. Do not point the muzzle at the person.
7. In the continuous work process, the glue gun stops working time generally not to surpass 5 minutes, otherwise, should play the glue to the glue to discharge finishes.
8. High-pressure rubber hose shall not be forced extrusion, bending, to prevent the impact of the normal work of the rubber gun.
- Basic Information Of Glue Gun
- Product Advantages Of Hand-mixed Ru...
- Glue Gun Not Out Of Glue Reason
- How To Solve The Rubber Gun Leak
- Introduction Of Hot Melt Glue Gun P...
- Method Of Using Hot Melt Glue Gun
- Basic Definition Of Jumpers
- Application Of Hot Melt Adhesive Fi...
- Maintenance And Maintenance Of Hot ...
- Simple Classification Of Hot Melt G...
- How Does Glue Gun Solve Little Prob...